User's Guide

to the SOLID Interference Detection Library

last updated January 8, 1999

for version 2.0

Gino van den Bergen


Version 2, June 1991

Copyright © 1991 Free Software Foundation, Inc.
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.

[This is the first released version of the library GPL.  It is
 numbered 2 because it goes with version 2 of the ordinary GPL.]


The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.

This license, the Library General Public License, applies to some specially designated Free Software Foundation software, and to any other libraries whose authors decide to use it. You can use it for your libraries, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library, or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link a program with the library, you must provide complete object files to the recipients so that they can relink them with the library, after making changes to the library and recompiling it. And you must show them these terms so they know their rights.

Our method of protecting your rights has two steps: (1) copyright the library, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the library.

Also, for each distributor's protection, we want to make certain that everyone understands that there is no warranty for this free library. If the library is modified by someone else and passed on, we want its recipients to know that what they have is not the original version, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that companies distributing free software will individually obtain patent licenses, thus in effect transforming the program into proprietary software. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License, which was designed for utility programs. This license, the GNU Library General Public License, applies to certain designated libraries. This license is quite different from the ordinary one; be sure to read it in full, and don't assume that anything in it is the same as in the ordinary license.

The reason we have a separate public license for some libraries is that they blur the distinction we usually make between modifying or adding to a program and simply using it. Linking a program with a library, without changing the library, is in some sense simply using the library, and is analogous to running a utility program or application program. However, in a textual and legal sense, the linked executable is a combined work, a derivative of the original library, and the ordinary General Public License treats it as such.

Because of this blurred distinction, using the ordinary General Public License for libraries did not effectively promote software sharing, because most developers did not use the libraries. We concluded that weaker conditions might promote sharing better.

However, unrestricted linking of non-free programs would deprive the users of those programs of all benefit from the free status of the libraries themselves. This Library General Public License is intended to permit developers of non-free programs to use free libraries, while preserving your freedom as a user of such programs to change the free libraries that are incorporated in them. (We have not seen how to achieve this as regards changes in header files, but we have achieved it as regards changes in the actual functions of the Library.) The hope is that this will lead to faster development of free libraries.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, while the latter only works together with the library.

Note that it is possible for a library to be covered by the ordinary General Public License rather than by this special one.


  1. This License Agreement applies to any software library which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Library General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
  2. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
  3. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
    1. The modified work must itself be a software library.
    2. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
    3. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
    4. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)
    These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
  4. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
  5. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
  6. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
  7. As an exception to the Sections above, you may also compile or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
    1. Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)
    2. Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
    3. If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
    4. Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
    For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
  8. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
    1. Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.
    2. Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.
  9. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
  10. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
  11. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
  12. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
  13. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
  14. The Free Software Foundation may publish revised and/or new versions of the Library General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
  15. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.




How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

one line to give the library's name and an idea of what it does.
Copyright (C) year  name of author

This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
Library General Public License for more details.

You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place - Suite 330, Cambridge,
MA 02139, USA.

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in
the library `Frob' (a library for tweaking knobs) written
by James Random Hacker.

signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice

That's all there is to it!


SOLID is a library for collision detection of three-dimensional objects undergoing rigid motion and deformation. SOLID is designed to be used in interactive 3D graphics applications, and is especially suited for collision detection of objects and worlds described in VRML. Some of its features are:

Installing SOLID


The library is written in standard C++ and relies heavily on the STL. Currently, it compiles under GNU g++ version 2.8.1 and up. The library has a standard C API and can be linked to both C and C++ applications. In order to link it to C applications you need the libstdc++ library.


In case you have a recent GNU developers environment installed, simply typing `make' in the root of the distribution directory will build the library, a sample client and documentation.

If you want to use another compiler, you should make the necessary changes to the `Make-config' file in the root directory. See the comments in this file for details.

The auxiliary C++ classes in `include/3D' for performing affine transformation in 3D have all their code inlined, so you do not need to link a library in order to use them.

Trouble in Installation

Q: My compiler cannot figure out the templates used in the SOLID source! What's the matter?

A: Your compiler does not comply with the ISO standard for C++. Install the GNU g++ compiler version 2.8.1 or higher for your platform.


Building Shapes

The commands for creating and destroying shapes are

DtShapeRef dtBox(DtScalar x, DtScalar y, DtScalar z);
DtShapeRef dtCone(DtScalar radius, DtScalar height);
DtShapeRef dtCylinder(DtScalar radius, DtScalar height);
DtShapeRef dtSphere(DtScalar radius);
DtShapeRef dtNewComplexShape();

void dtDeleteShape(DtShapeRef shape);

Shapes are referred to by values of DtShapeRef. Currently, the type DtScalar is defined as double. The command dtBox creates a rectangular parallelepiped centered at the origin and aligned with the axes of the shape's local coordinate system. The parameters specify its extent along the respective coordinate axes. The commands dtCone and dtCylinder create respectively a cone and a cylinder centered at the origin and whose central axis is aligned with the Y-axis of the local coordinate system. The cone's apex is at y = height / 2. The command dtSphere creates a sphere centered at the origin of the local coordinate system.

Other shape types based on point data, such as polygon soups, simplicial complexes, (compositions of) convex polyhedra, are created by the dtNewComplexShape command. For constructing complex shapes the following commands are used:

DtShapeRef dtNewComplexShape();
void dtEndComplexShape();

void dtBegin(DtPolyType type);
void dtEnd();
void dtVertex(DtScalar x, DtScalar y, DtScalar z);

void dtVertexBase(const void *base);
void dtVertexIndex(DtIndex index);
void dtVertexIndices(DtPolyType type, DtCount count, const DtIndex *indices);
void dtVertexRange(DtPolyType type, DtIndex first, DtCount count); 

A complex shape is composed of d-dimensional polytopes, where d is at most 3. A d-polytope can be a simplex (point, line segment, triangle, tetrahedron), a convex polygon, or a convex polyhedron. The type of d-polytope is specified by a value of DtPolyType, defined as

typedef enum DtPolyType {
} DtPolyType;

A d-polytope is specified by enumerating its vertices. This can be done in two ways. In the first way, the vertices are specified by value, using the dtVertex command. The following example shows how the faces of a pyramid are specified.

DtShapeRef pyramid = dtNewComplexShape();

dtVertex(1.0, 0.0, 1.0); 
dtVertex(1.0, 0.0, -1.0); 
dtVertex(-1.0, 0.0, -1.0); 
dtVertex(-1.0, 0.0, 1.0);

dtVertex(1.0, 0.0, 1.0); 
dtVertex(1.0, 0.0, -1.0); 
dtVertex(0.0, 1.27, 0.0); 



In the second method, the vertices are stored in an array, and are referred to by indices. For each complex shape, we can specify a single array. A vertex array is specified by the command dtVertexBase, which takes the address of the first element in the array, referred to as the base of the array, as argument. The command dtVertexIndex is used for specifying vertices. See the following example:

DtScalar vertices[5 * 3] = { 
  1.0, 0.0, 1.0, 
  1.0, 0.0, -1.0, 
  -1.0, 0.0, -1.0, 
  -1.0, 0.0, 1.0, 
  0.0, 1.27, 0.0 

DtShapeRef pyramid = dtNewComplexShape();





Alternatively, the indices can be placed into an array and specified using the command dtVertexIndices, as in the following example:

DtScalar vertices[5 * 3] = { 
  1.0, 0.0, 1.0, 
  1.0, 0.0, -1.0, 
  -1.0, 0.0, -1.0, 
  -1.0, 0.0, 1.0, 
  0.0, 1.27, 0.0 

DtIndex face0[4] = { 0, 1, 2, 3 };
DtIndex face1[3] = { 0, 1, 4 };


DtShapeRef pyramid = dtNewComplexShape();

dtVertexIndices(DT_SIMPLEX, 4, face0);
dtVertexIndices(DT_SIMPLEX, 3, face1);



Finally, a polytope can be specified from a range of vertices using the command dtVertexRange. The range is specified by the first index and the number of vertices. In the following example a pyramid is constructed as a convex polyhedron, which is the convex hull of the vertices in the array.

DtScalar vertices[5 * 3] = { 
  1.0, 0.0, 1.0, 
  1.0, 0.0, -1.0, 
  -1.0, 0.0, -1.0, 
  -1.0, 0.0, 1.0, 
  0.0, 1.27, 0.0 

DtShapeRef pyramid = dtNewComplexShape();
dtVertexRange(DT_POLYHEDRON, 0, 5);

Note that the vertices of a simplex need not be affinely independent, and the vertices specifying a convex polyhedron need not be extreme vertices of the convex hull. However, in order to construct a proper convex polygon, the vertices should be approximately coplanar and specified in the order as they appear on the boundary.

Creating and Moving Objects

An object is an instance of a shape. The commands for creating, moving and deleting objects are

void dtCreateObject(DtObjectRef object, DtShapeRef shape); 
void dtDeleteObject(DtObjectRef object);
void dtSelectObject(DtObjectRef object);

void dtLoadIdentity();

void dtLoadMatrixf(const float *m);
void dtLoadMatrixd(const double *m);

void dtMultMatrixf(const float *m);
void dtMultMatrixd(const double *m);

void dtTranslate(DtScalar x, DtScalar y, DtScalar z);
void dtRotate(DtScalar x, DtScalar y, DtScalar z, DtScalar w);
void dtScale(DtScalar x, DtScalar y, DtScalar z);

An object is referred to by a DtObjectRef, which is defined as void *. Any pointer type may be used to refer to an object. In general, a pointer to a structure in the client application associated with the collision object should be used.

An object's motion is specified by changing the placement of the local coordinate system of the shape. Initially, the local coordinate system of an object coincides with the world coordinate system.

The current object is the last created or selected object. The placement of the current object is changed, either by translations, rotations and nonuniform scalings, or by using an OpenGL 4x4 column-major matrix representing an affine transformation. Placements are specified absolute or relative to the previous placement. Rotations are specified using quaternions. Following example shows how a pair of objects are given absolute placements.

dtCreateObject(&object1, hammer);
dtCreateObject(&object2, nail);

dtTranslate(0, 1, 1);
dtRotate(0, 0, 1, 0);

dtTranslate(0, 1, 0);
dtRotate(0, 0, 0, 1);

Who's Afraid of Quaternions?

A quaternion is a four-dimensional vector. The set of quaternions of length one (points on a four-dimensional sphere) map to the set of orientations in three-dimensional space. Since in many applications an orientation defined by either a rotation axis and angle or by a triple of Euler angles is more convenient, the package includes code for quaternion operations. The code is found in a library of C++ classes for 3D affine transformations. The classes are found in the `include/3D' directory. All the code is inlined so you do not need to link a library in order to use the classes.

The quaternion class is found in the file `Quaternion.h'. The class has constructors and methods for setting a quaternion. For example

Quaternion q1(axis, angle);
Quaternion q2(yaw, pitch, roll);


q1.setRotation(axis, angle);
q2.setEuler(yaw, pitch, roll);


dtRotate(q1[X], q1[Y], q1[Z], q1[W]);

Also included is a static method Quaternion::random(), which returns a random orientation.

Response Handling

Collision response in SOLID is handled by means of callback functions. The callback functions have the type DtResponse defined by

 typedef void (*DtResponse)(
   void *client_data, 
   DtObjectRef object1, 
   DtObjectRef object2,
   const DtCollData *coll_data)

Here, client_data is a pointer to an arbitrary structure in the client application, object1 and object2 are colliding objects, and coll_data is the response data computed by SOLID.

Currently, there are three types of response: simple, smart and witnessed response. For simple response the value of coll_data is NULL. For smart and witnessed response coll_data points to the following structure

typedef struct DtCollData {
  DtVector point1;
  DtVector point2;
  DtVector normal;
} DtCollData;

An object of this type represents a pair of points of the respective objects. The points point1 and point2 are given relative to the local coordinate system of their respective objects object1 and object2. The normal field is used for smart response only.

For witnessed response, the points represent a witness of the collision. As a result of this the global coordinates of the witness points are equal. For smart response, the points represent the closest point pair of the objects at placements from the previous time frame. The normal field contains the difference of the global coordinates of the closest point pair, i.e., normal = Global(point1) - Global(point2). We will discuss this type of response more thoroughly further on.

Response is defined as default response for all pairs of objects, as object response for all pairs containing a given object, or as pair response for a particular pair of objects. The commands for defining and undefining response are

void dtSetDefaultResponse(DtResponse response, DtResponseType type, 
			  void *client_data)  
void dtClearDefaultResponse()

void dtSetObjectResponse(DtObjectRef obj, DtResponse response, 
			 DtResponseType type, void *client_data)
void dtClearObjectResponse(DtObjectRef obj)
void dtResetObjectResponse(DtObjectRef obj)

void dtSetPairResponse(DtObjectRef obj1, DtObjectRef obj2, 
		       DtResponse response, DtResponseType type, 
		       void *client_data)
void dtClearPairResponse(DtObjectRef obj1, DtObjectRef obj2)
void dtResetPairResponse(DtObjectRef obj1, DtObjectRef obj2)

A response is defined by either a Set or a Clear command. The Clear command defines the response to be nil (no response).

Initially, the default response is nil and all pairs of objects have a default response. If for an object pair, one of the objects has an object response defined, then this response overrules the default response. A pair response overrules any object or default response. If for both objects there is an object response defined, then one of the responses is chosen. In this case, one of the responses may be forced to be chosen by defining it as a pair response.

A response is undefined, i.e., reset to a more general setting, by the Reset commands. The command dtResetPairResponse resets the response of a pair of objects to an object response, if one is defined for an object in the pair, or otherwise to the default response. The command dtResetObjectResponse resets the responses of the object pairs, for which no other object response or a pair response is defined, to the default response. Note that whenever an object is deleted, the object response and all pair responses that are set for this object are reset automatically.

The DtResponseType is defined by

  typedef enum DtResponseType { 
  } DtResponseType

Setting the response type to DT_NO_RESPONSE is equivalent to clearing the response.

The response callback functions are executed for each colliding pair of objects by calling

int dtTest()

This function returns the number of callback functions that are executed.

Smart Response

For physics-based simulations it is often necessary to have a representation of the collision plane of a pair of colliding objects in order to compute the reaction forces. From a single configuration of two colliding objects it is hard to compute a collision plane, since there is no knowledge of how this configuration came about. Therefore, SOLID uses the configuration of the objects from the previous time frame for approximating the collision plane. If the objects were disjoint in the previous time frame, then the vector defined by the difference of the closest point pair of the objects is a good approximation of the collision plane's normal.

By selecting smart response for a pair of objects, the closest point pair and the normal from the previous time frame are computed. The points point1 and point2 are given in local coordinates and the normal relative to the global basis and pointing away from object2. In order to compute these values, the configuration of objects must be stored in each time frame. This is done by calling

void dtProceed();

Note that in order to guarantee that a non-zero normal can be found, the dtProceed command may only be called if all object pairs for which a smart response is defined, are disjoint! The common way of guarding this is by iteratively doing collision tests and changing the placements until the objects are disjoint. Note that it is possible and often necessary to call dtTest multiple times before calling dtProceed.

Deformable Models

SOLID handles deformations of complex shapes. In this context deformations are specified by changes of vertex positions. Complex shapes that are defined using a vertex array in the client application may be deformed by changing the array elements, or specifying a new array. SOLID is notified of a change of vertices by the command

void dtChangeVertexBase(DtShapeRef shape, const void *base);

When using convex polygons or convex polyhedra as shape components, the client should warrant that the vertex changes do not violate the convexity and topology (planar graph embedding) of a component!

Note that in order to use smart response for deformable shapes, the change of vertices should be done by specifying a new array. The vertex array of the previous time frame should be kept intact, otherwise SOLID can not determine the configuration of objects of the previous time frame. This is best handled by applying a `double buffering' technique. After a call to dtProceed, the new vertex positions are placed in the free buffer of a pair of vertex buffers, and dtChangeVertexBase is called using this buffer, after which the other buffer becomes the free buffer.


In computer animations there is usually a lot of frame coherence (objects move smoothly). In these cases, caching and reusing earlier computations will yield a considerable performance improvement. The caching option of SOLID enables an incremental sort on the set of objects, in order to reduce the number of pairwise intersection tests. Moreover, when the cashing option is on, data from earlier intersection tests is stored and used for faster determination of the intersection status of a pair of objects. Caching is enabled and disabled by

void dtEnableCaching()
void dtDisableCaching()

Caching may be enabled or disabled at any time during a simulation. This option is enabled by default.

Projects and other things left to do

Coming Attractions

Look out for my thesis describing the design and performance evaluation of SOLID, to appear in March, 1999.

Bug Reports

Please send remarks, questions and bug reports to, or write to Gino van den Bergen, Department of Mathematics and Computing Science, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands.

This document was generated on 13 August 1999 using the texi2html translator version 1.51a.